MINOLTA-QMS Magicolor 2200 DP Guía de instalación descargar pdf (Pagina 48)

Installing Printer Drivers and Software46

Click the Queue User Name button and select the user from the list.

Click the Finish button.

On the Server’s console the Administrator password must be entered in order to load

the Printer Agent.

Select the printer drivers for the different operating system and click the Continue

button.

Check the information box for the selected drivers.

The printer and network configuration is now complete. For individual workstation driver

installation, refer to the appropriate chapter in this manual for instructions on installing

drivers, host software, or other utilities.

NetWare 5.x—IP/NDPS

TCP/IP Interface Configuration

Detailed instructions for configuring TCP/IP can be found in the

CrownBook

If you use DHCP to configure TCP/IP, you must enable DHCP/WINS in

Administration/Communications/Resident NIC/CrownNet/TCP/IP printer

configuration menu.

You can configure your print system by several different methods. This section briefly

describes the configuration procedure for the printer interface. You can make these

configuration changes through any of the following means:

„

Printer control panel

„

CrownAdmin 3 for Windows

„

Remote Console through a telnet session

If necessary, in the Administration/Communications/Resident NIC/CrownNet/

TCPIP/Internet Address menu, enter the printer’s Internet address.

The factory default Internet address is 161.033.128.024.

If necessary, in the Administration/Communications/Resident NIC/CrownNet/

TCPIP/Default Router menu, enter the Internet address of the default router.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 69 70

Sin comentarios

MINOLTA-QMS Magicolor 2200 DP Guía de instalación Pagina 48